FOOT-LEVERED BENDING MACHINE

3 pt. 23,8 - 100 mm.
4 pt. 23,8 - 50 mm.

• This is one of the bending machines used in the manufacturing of package cutting moulds.
• By UB-08, you can easiliy bend the high and thick rules used in leather, nylon bag and vacuum cutting moulds.
• This machine, thanks to its high eccentric power, allows you the possibility of bending without causing any difficulty.

COVERING WITH CHROME NITRIDE

The top plate part of the machines is manufactured from stainless steel and its surface has been hardened by means of nitration. After these processes, it is covered with a special covering/casing CrN (Chrome Nitride). By this means special coating, any scratching or corrosion doesn't occur and the bevel part of the part being bended will not be deformed, even if the bevel of the cutter to be bended contacts with the top plate.

Optionally, there is a bending set comprising of 20 parts that we recommend for the purpose of using with the machines. These sets can perform bending by starting from R1 to R16.

The sets used with the machines are made of imported stroke steels and have been hardened with the most correct heat treatment and cut with wire erosion with 0,01 mm precision.

RIGID and DURABLE

Body of the machine is made of modular sfero casting, and this added strength and durability to the machine. As the machine has a rigid body, it is able to resist the impacts that will occur during the bending operation for many years.

NO MORE CORROSION and RUSTING

UB-08 bending machines parts have been covered with CrN, and by this means, it is long lasting against corrosion and rusting.

The machine is guaranteed by our firm for a period of 1 year.

UB-08 PDF